深圳盛宏达润滑油贸易公司
电话:0755-81713199
传真:0755-81713599
手机:13316970397
联系人:魏经理
www.shell66.com
shenghong66@126.com
地址:深圳市南山区深南大道高新科技园A单元10号108室
邮编:518000
在线QQ:1309715701
在线QQ:1435741274
工业润滑油
工业润滑脂
工业润滑剂
食品级润滑脂
专业专注,用心服务
美孚润滑油 壳牌润滑油 阿吉普润滑油 克鲁勃润滑油
埃尔夫润滑油 福斯润滑油 道达尔润滑油 嘉实多润滑油
产品分类
 
产品展示
FR WG 200-D详细说明 (浏览670次)
FR WG 200-D
Water-Glycol, Fire Resistant Hydraulic Fluid
DESCRIPTION: The use of industrial fluid power or hydraulics has increased substantially over
the past two decades - not only in U.S. industry but also in worldwide industry. In
addition to this increase in fluid power usage, we have seen some rather drastic
changes in the operating conditions of industrial hydraulic circuitry over the same time span.
Increased production demands, larger work pieces, and
higher output machinery haveall had the net effect of
elevating hydraulic system operating pressures in most
industries. This, in itself, has imposed greater
performance demands on hydraulic fluids. Fluids that
were designed to perform at 7 MPa (1,000 psi) cannot
adequately satisfy the requirements of today’s pressures
of 14 MPa (2,000 psi) and higher.
Hand in hand with these changes in hydraulic system
conditions, we also find a substantial increase in the
volumes of fire resistant fluids being consumed by our
industrial segment. This has been brought about, in part,
by increased regulations at all levels of government to
insure safe working conditionsfor our labor forces. In
addition to these regulatory codes, industrial management,
as a whole, has a keen awareness of the devastating cost
penalties resulting from plant fires. As system pressures go higher, the chance of hydr
aulic line rupture increases
and the potential for fire becomes greater. Therefore, a
modern fire resistant hydraulic fluid must offer the
consumer not only maximum fire protection, but must
give the optimum lubrication and wear protection
necessary for pumps and other hydraulic hardware
running at these elevated pressures. FR WG 200-D
is a water-glycol fire-resistant hydraulic
fluid developed and designed specifically to operate at
system pressures in the 14 - 28 MPa (2,000 - 4,000 psi)
range, depending on pump type (i.e., vane vs. piston).
This unique formulation contains more than a sufficient
amount of water to prevent the propagation of fires in the event of a hydraulic
line rupture near an ignition source. Moreover, FR WG 200-D has all the necessary
lubrication and anti-wear properties required of a
hydraulic fluid for service in high-pressure, high-output
systems. Other advantages include:
Excellent corrosion protection - both liquid and vapor
phase - to the metals commonly used in hydraulic systems.
The superior heat transfercharacteristics of water.
The viscosity/temperature properties, combined with a
very low pour point, prevent or minimize cavitation and cold start-up pump wear
problems associated with
other fluids having poorer viscosity/temperature problems.
Compatible with most conventional seals, gaskets, and “O” rings.
Can be satisfactorily mixed with other water-glycol type fluids.
Resistant to oxidation and chemical breakdown.
Will not separate when in normal use and storage. FIRE RESISTANCE
Fire resistance is imparted to
FR WG 200-D through its water content that is releasedas a snuffing blanket of
steam if the fluid comes incontact with an ignition
source. Because of its water content, this product has the
ability to prevent flame propagation when fire occurs. FR WG 200-D
has been tested and approved by Factory
Mutual Research.
上一产品: Enersyn SF-C 14 R、SF-C 14
下一产品: EcoSafe®V-200
Copyright (C) 2010 深圳市盛宏达润滑油贸易有限公司 www.shell66.com All Right Reserved
地址:深圳市南山区深南大道高新科技园A单元10号108室 电话:0755-81713199 传真:0755-81713599 联系人:魏经理
网址:www.shell66.com E-mail:shenghong66@126.com 粤ICP备17002569号    拼装地板 幼儿园地板